CorrosionResistance相关论文
采用激光选区熔化技术分别在基板温度35℃和200℃条件下制备了Al-3.40Mg-1.08Sc合金板材,并对其沿高度方向上的耐蚀性能进行了研究......
采用电沉积铜-石墨烯(Cu-GR)复合膜的方法对稀土永磁NdFeB材料进行包覆以提高其耐腐蚀性.对Cu-GR膜层的微观结构、水接触角和表面......
采用简单、高效、低成本的刻蚀技术,实现了航空用超疏水7075铝合金的规模化可控制备.阻抗测试表明,制备得到的超疏水7075铝合金的......
Effects of variations of voltage and pH value on the shear strength of soil and durability of differ
Electrokinetic(EK)treatment is an effective method in accelerating the consolidation and improving the geotechnical prop......
Data-mining and atmospheric corrosion resistance evaluation of Sn- and Sb-additional low alloy steel
Machine-learning and big data are among the latest approaches in corrosion research. The biggest challenge in corrosion ......
Ti-Cu alloy has potential to be used in plastic surgery and dental implants due to its strong antibacterial properties,h......
Copper (Cu)-bearing stainless steel has testified its effectiveness to reduce the risk of bacterial infections.However,i......
Improving the lubrication and anti-corrosion performance of polyurea grease via ingredient optimizat
Thickener formulation plays a significant role in the performance characteristics of grease. The polyurea greases (PUGs)......
Pure Al and Al-30％ Al2O3 composite coatings are prepared on the surface of AZ31B magnesium alloy by low-pressure cold spr......
通过电化学测试、扫描振动电极技术、浸泡实验和析氢实验分析AZ80合金、磷酸钙转化涂层以及含划痕涂层的耐腐蚀性能,进而研究划痕......
The 2024 anodized aluminum alloy film was sealed by KAl(SO4)2 solution and the effect of sealing on corrosion resistance......
通过光学显微镜(OM)、扫描电子显微镜(SEM)、浸泡实验、电化学测试和拉伸试验研究了微合金化处理对生物材料镁合金的耐蚀性能和力......
One-pot scalable in situ growth of highly corrosion-resistant MgAl-LDH/MBT composite coating on magn
Current corrosion-resistant layered double hydroxide(LDH)coating on Mg alloy is usually in situ grown in autoclave by hy......
Incorporation of nano/micron-SiC particles in Ni-based composite coatings towards enhanced mechanica
Ni-based composite coatings incorporated with nano/micron SiC particles were fabricated via electrochemical co-depositio......
采用铜模负压吸铸工艺制备了(Zr0.6336Cu0.1452Ni0.1012Al0.12)100-xTm (x=0～5,原子分数)块体金属玻璃(BMG)合金,研究了Tm对合金力......
采用光纤激光器,在不同功率下在Q235钢表面制备了铜基合金熔覆层.利用扫描电镜、能谱仪、X射线衍射仪和电化学工作站分别对熔覆层......
采用真空电弧熔炼法制备了不同Zr含量的FeCoCrNiZrx (x=0.5,0.75,1)高熵合金.研究了Zr含量对合金组织、磁性能和电化学腐蚀性能的......
Investigation of Anticorrosive Performance of Oil-infused Slippery and Superhydrophobic Brass Surfac
Brass is widely used in machinery,electronic appliances and emerging industries.The corrosion resistance of laser-induce......
A polymethyltrimethoxysilane (PMTMS)/hydroxyapatite (HA) hybrid coating was successfully fabricated on a magnesium alloy......
A calcium stearate-based hydrophobic coating was formed on an anodized magnesium alloy by the electrodeposition method.T......
Optimized Combinatorial Properties of an AlMgSi(Cu) Alloy Achieved by a Mechanical-Thermal Combinato
Enhancing combinatorial properties,such as excellent corrosion resistance,high strength and good ductility combined,is a......
The high-current pulsed electron beam (HCPEB) treatment with current density 6 J/cm2 was applied on AZ91 Mg alloy to imp......
High-strength,corrosion-resistant,and lightweight Al-Mg alloys perform an important function in harsh coastal service en......
Electrochemical Performance of Passive Film Formed on Ti-Al-Nb-Zr Alloy in Simulated Deep Sea Enviro
Titanium alloy Ti-Al-Nb-Zr has high specific strength and becomes a promising structural material used in the deep sea.T......
Corrosion resistance behavior of Co-containing maraging stainless steels was investigated.Neutral salt spray and polariz......
...
Pure tetragonal 10-20-nm-size zirconia-based Ni-P composite coating was developed.The physicochemical and electrochemica......
The fracture of pipelines caused by corrosion cracks and the resulting oil and gas leakage can lead to great environment......
...
...
...
...
Plasma nitriding was used to improve the corrosion performance of anchor steel. The microstructure, phase constitution, ......
Self-healing Performance of Composite Coatings Prepared by Phosphating and Cerium Nitrate Post-seali
The phosphated and cerium nitrate post-sealed galvanized steel was ifrstly scratched to expose zinc layer and then place......
Enhancement of Active Anticorrosion via Ce-doped Zn-Al Layered Double Hydroxides Embedded in Sol-Gel
Ce-doped Zn-Al layered double hydroxide (LDH) nanocontainer was synthesized by a co-pre-cipitation method. X-ray diffrac......
An electro-deposition method has been recently proposed to repair cracked reinforced concrete. To evaluate the corrosion......
2198 and 5A90 Al-Li alloys were anodized with a constant DC potential in 18％H2SO4 solution (Solu.A) and the mixture solut......
High-energy shot peening(HESP),a method to produce severe plastic deformation by high velocity flying balls,was applied ......
Effects of KH-570 silane electro-deposition treatment on corrosion resistance of AZ31B magnesium all
In this study, electrochemical-assisted deposition (electro-deposition) was used to treat AZ31B magnesium alloy with sil......
Biomedical AZ31B magnesium alloy was treated by bis-l,2-(triethoxysilyl) ethane (BTSE) through the method of electro-dep......
Surface modification of 316L stainless steel with TiO2 and carbon nanotube doped TiO2 thin films for
Although 316L stainless steel(316L SS) has been widely used as biomedical materials, the hemocompatibility is also a cha......
Superhydrophobic coating is widely used in the fields of self-cleaning, anti-corrosion, anti-icing, water proofing, biom......
Anodizing is an effective technique to modify the surface properties of magnesium alloy and improve its corrosion resist......
Effects of High-Frequency Microforging on the Laser Cladding Layer Prepared on the 304 Stainless Ste
The laser cladding layer on the 304 stainless steel surface is modified by a high-frequency microforging process.The mic......
The weldability of the commercial duplex stainless steel B2101,B2304,B2205 and B2507 is discussed.Suitable welding metho......
